The American flag is a robust image of our nation’s values and beliefs. It’s a reminder of the sacrifices which have been made to guard our freedoms and a beacon of hope for the long run. As such, you will need to show the flag with respect and in accordance with the Flag Code. A method to do that is to hold the flag vertically.
There are a couple of alternative ways to hold the flag vertically. A method is to make use of a flagpole adapter. This machine suits onto the highest of an everyday flagpole and permits you to dangle the flag vertically. One other approach to dangle the flag vertically is to make use of a wall-mounted flag bracket. This bracket is connected to the wall and has a hook or rod from which the flag could be hung.
Regardless of which methodology you select, be sure you observe the Flag Code when hanging the flag vertically. The Flag Code states that the flag needs to be displayed with the union (the blue area with 50 stars) on the high and the stripes hanging down. The flag also needs to be flown at half-staff on Memorial Day and different days of mourning.
Vertical Flag Tips
When displaying the American flag vertically, it is essential to stick to the next tips to make sure correct decorum:
-
Orientation:
The flag needs to be hung with the blue union (the sector of stars) on the high, and the crimson and white stripes hanging vertically to the best. If the flag is held on a wall, the union needs to be on the left aspect as seen from the entrance.
For a vertical show, the flag needs to be at the least so long as it’s broad, with a minimal width of 20 inches. If the flag is flown outdoors, it needs to be at the least 6 ft broad and 10 ft lengthy.
When hanging the flag vertically, it is essential to make sure that the union is clearly seen and that the stripes circulate naturally in direction of the underside. Keep away from obscuring the flag with different objects or hanging it in a approach that distorts its form.
Choosing the Correct Flag
Selecting the Appropriate Measurement
The vertical positioning of an American flag necessitates a distinct measurement than its horizontal counterpart. The ratio for a vertical flag needs to be 2:3, whereas the horizontal flag follows a ten:19 ratio.
Seek advice from the desk beneath for particular measurements based mostly on the variety of stars:
| Variety of Stars | Top (ft.) | Width (ft.) |
|---|---|---|
| 13 | 3 | 2 |
| 15 | 3.5 | 2.5 |
| 20 | 4 | 3 |
| 25 | 4.5 | 3.5 |
| 30 | 5 | 4 |
Materials Concerns
For a vertical flag supposed for outside show, sturdy supplies like nylon or polyester are really useful. These materials can stand up to the weather and preserve their vibrant colours over time. For indoor use, a lighter materials like cotton could be appropriate.
Flag Orientation
When hanging a vertical American flag, be certain that it’s displayed with the celebrities on the high and the stripes on the right-hand aspect (when dealing with the flag). That is the right orientation for a vertical flag, versus a horizontal flag the place the celebrities are positioned within the higher left nook.
Measuring the Wall and Flag
Measuring the Wall
To make sure a exact and aesthetically pleasing show, it’s essential to measure the wall the place you plan to hold the flag. Use a measuring tape to find out its width and top, from the ground to the ceiling.
Measuring the Flag
Retrieve the American flag you propose to hold vertically and lay it out flat on a desk or different even floor. Measure the width (size of the stripes) and top (top of the blue area) of the flag utilizing a measuring tape.
Figuring out the Optimum Placement
To realize a balanced and visually interesting association, observe these tips:
- Centering: Place the flag within the heart of the wall horizontally (centered between the left and proper edges) and vertically (centered between the ground and ceiling).
- Flag’s Top vs. Wall’s Top: The flag’s top needs to be roughly two-thirds to three-quarters of the wall’s top. This proportion creates a visually harmonious show.
- Star Area Placement: For a vertical show, the blue star area needs to be positioned on the higher proper nook of the flag when seen from the entrance. This orientation represents the place of the celebrities within the evening sky.
- Adjusting for Non-Customary Wall Sizes: If the wall’s top or width shouldn’t be appropriate for a standard-sized flag, it’s possible you’ll have to buy a custom-sized flag or regulate its placement accordingly.
Here’s a desk summarizing the really useful proportions for hanging a flag vertically:
| Wall Top | Beneficial Flag Top |
|---|---|
| 6-8 ft | 4-6 ft |
| 9-12 ft | 6-9 ft |
| Over 12 ft | Customized-sized flag really useful |
Figuring out the Top and Width
To find out the suitable top and width for a vertically hung American flag, contemplate the next tips:
Flagpole Top
The flagpole top needs to be at the least 1.5 occasions the flag’s top. For instance, a 3′ x 5′ flag would require a flagpole top of at the least 4.5′.
Flag Width
The flag’s width needs to be roughly 7/10 of its top. A 3′ x 5′ flag has a width of seven/10 x 3′ = 2.1′.
Flag Facet Ratio
The flag’s side ratio (top to width ratio) needs to be 1.9:1. Which means for each 1.9 inches of top, there needs to be 1 inch of width.
| Flag Dimensions | |
|---|---|
| Top | Width |
| 3′ | 2.1′ |
| 4′ | 2.8′ |
| 5′ | 3.5′ |
Marking the Middle Level
To make sure the flag hangs appropriately and symmetrically, it’s essential to mark the middle level. Observe these steps to precisely find the middle:
1. Measure the Top
Utilizing a measuring tape or ruler, decide the general top of the flag from high to backside.
2. Divide by Two
Divide the peak measurement by two to seek out the midway level. This will provide you with the approximate location of the middle.
3. Mark the Again
Flip the flag over to the again aspect. Utilizing a cloth marker or chalk, mark the middle level on the again of the flag utilizing a straight line.
4. Create a Help
If you’re hanging the flag on a floor that doesn’t have a vertical assist, comparable to a wall, you will have to create a assist rod. This is usually a wood dowel, metallic rod, or some other sturdy materials that may maintain the flag in place.
5. Dangle the Rod
Connect the assist rod to the floor, guaranteeing that it’s stage. Align the rod with the middle line you marked on the again of the flag. The rod will act because the anchor level for hanging the flag vertically.
Utilizing String or Measuring Tape
Marking the Prime of the Flag
1. Lay the flag flat on a clear floor.
2. Fold the flag in half lengthwise, bringing the star area and stripes collectively.
3. Crease the middle fold from high to backside, securing it with binder clips or tape.
4. Unfold the flag, leaving the middle crease seen.
5. Discover the middle of the highest fringe of the flag by measuring it from both aspect.
6. Minimize a chunk of string or measuring tape to the size you want for the flag’s hanging top.
7. Fold the string or tape in half and mark the midpoint.
8. Place the midpoint of the string or tape on the heart of the highest fringe of the flag, aligning it with the middle crease.
9. Tape or clip the string or tape to the flag, leaving a loop on the high for hanging.
Securing the Flag
1. Tie a knot on the finish of the string or tape to create a loop.
2. Hook the loop onto a hook or nail pushed into the wall.
3. Alter the string or tape to make sure the flag hangs vertically and the stripes are parallel to the ground.
Hanging the Flag with Nails or Hooks
Hanging the American flag vertically requires particular measurements and methods to make sure it’s displayed respectfully and correctly. When utilizing nails or hooks for vertical hanging, observe these steps:
1. Decide the Middle of the Flag
Fold the flag in half lengthwise, then in half once more widthwise. The intersection of the folds marks the middle of the flag.
2. Mark the Wall
Measure the gap from the ceiling to the ground the place the flag ought to dangle. Divide this measurement by two and mark this level on the wall.
3. Discover the Flag’s Prime Edge
Measure the peak of the flag and subtract 2 inches. That is the gap from the highest of the pole to the highest of the flag.
4. Mark the Flag’s Prime Edge on the Wall
Measure down from the marked level on the wall by the peak calculated in step 3. That is the place the highest fringe of the flag needs to be hung.
5. Drive Nails or Insert Hooks
Drive two nails or insert two hooks into the wall, spaced evenly about 6 inches aside. The nails or hooks needs to be on the top marked in step 4.
6. Connect the Pole to the Nails or Hooks
Insert the flagpole into the rings or grommets on the highest fringe of the flag. Dangle the flag by looping the pole over the nails or hooks on the wall.
7. Place the Flag Appropriately
Make sure that the celebrities on the flag are dealing with the highest and that the blue area is on the left aspect of the observer. The stripes ought to dangle vertically and be parallel to the wall.
| Star Area | Stripe Area |
|---|---|
| Prime | Backside |
| Left | Proper |
Further Suggestions for Stability
8. Safe the Rope to the Pole Utilizing a Knot
There are lots of various kinds of knots that can be utilized to safe a rope to a pole. Nevertheless, not all knots are created equal. When selecting a knot, you will need to contemplate the next components:
- The power of the knot: The knot ought to be capable to stand up to the drive of the wind and the burden of the flag.
- The convenience of tying the knot: The knot needs to be simple to tie, even in sturdy winds.
- The sturdiness of the knot: The knot ought to be capable to stand up to the weather and repeated use.
Primarily based on these components, there are three knots which might be generally used to safe a rope to a pole:
- The clove hitch: The clove hitch is a straightforward and safe knot that’s simple to tie. It’s generally used to safe a ship to a dock or to tie a rope to a tree.
- The sq. lashing: The sq. lashing is a robust and sturdy knot that’s preferrred for securing a rope to a pole. It’s generally used to construct constructions comparable to bridges and fences.
- The taut-line hitch: The taut-line hitch is a flexible knot that can be utilized to safe a rope to a pole or to regulate the stress of a rope. It’s generally used to tie down a tent or to safe a load to a truck.
After getting chosen a knot, observe these steps to safe the rope to the pole:
- Move the rope across the pole and produce the ends collectively.
- Tie the knot in accordance with the directions.
- Pull on each ends of the rope to tighten the knot.
- Trim any extra rope.
Hanging the Flag in Outside Areas
When displaying the American flag vertically, it needs to be oriented in order that the blue area with the celebrities is on the left and the stripes are on the best from the viewer’s perspective. This orientation ensures that the Union (blue area) is within the appropriate place of honor.
Flagpole Show
- The flag needs to be flown from a flagpole that’s tall sufficient for the flag to fly freely with out touching the bottom or some other objects.
- The flagpole needs to be sturdy sufficient to resist the wind and climate situations.
- The flag needs to be raised and lowered in a dignified method.
- The flag needs to be flown in the course of the day, from dawn to sundown, except it’s illuminated at evening.
Wall Show
- The flag needs to be displayed on a wall or different vertical floor.
- The flag needs to be hung in order that the blue area with the celebrities is on the high.
- The flag needs to be taut and wrinkle-free.
- The flag shouldn’t be displayed in a approach that it may very well be broken or dirty.
Different Concerns
- The American flag ought to by no means be flown the wrong way up besides as a misery sign.
- The American flag shouldn’t be flown in inclement climate, comparable to throughout a storm.
- The American flag needs to be disposed of correctly when it turns into worn or torn.
| Beneficial Flagpole Heights |
|---|
| 15 ft for a 3’x5′ flag |
| 20 ft for a 4’x6′ flag |
| 25 ft for a 5’x8′ flag |
Respecting the American Flag
1. It needs to be displayed able of honor.
This implies it needs to be positioned on the right-hand aspect of different flags, or above them if they’re hung vertically.
2. No different flag ought to fly increased than the American flag.
If there may be one other flag flown, it needs to be positioned on the left or on the similar stage.
3. The flag shouldn’t contact the bottom.
If it does, it needs to be cleaned or changed instantly.
4. The flag shouldn’t be used as clothes or for some other objective.
It ought to solely be used for ceremonial or ornamental functions.
5. The flag needs to be handled with respect.
This implies not folding it up haphazardly or utilizing it as a doormat.
6. The flag needs to be correctly folded when not in use.
As stipulated by the flag code, the flag is to be folded within the following method:
- Fold the flag lengthwise, bringing the striped finish to the highest and the blue area to the underside.
- Fold the flag in half widthwise, bringing the striped finish to the blue area.
- Tuck the underside nook of the flag up and over the blue area, making a triangle.
- Proceed folding the flag on this method till it’s fully folded.
7. The flag needs to be flown at half-mast on sure events.
To point out respect, the flag needs to be flown at half-mast after the dying of a president, vice chairman, or different high-ranking official. It also needs to be flown at half-mast on Memorial Day, and on Peace Officers Memorial Day.
8. The flag needs to be displayed always of day.
The flag shouldn’t solely be displayed in the course of the day, it may also be displayed at evening, however it have to be illuminated.
9. The flag needs to be correctly saved when not in use.
The easiest way to retailer the flag is in a dry, darkish, and funky place. It also needs to be positioned in a container that may shield it from mud and moisture.
10. The flag needs to be changed when it’s worn or torn.
To point out respect, the flag shouldn’t be displayed whether it is worn or torn. The next are some particular guidelines for when to exchange the flag:
| Situation | When to Exchange |
|---|---|
| Fading or fraying | When the colours begin to fade or the material begins to fray |
| Tearing | When there’s a tear or gap within the material |
| Soiling | When the flag is soiled or stained |
How To Dangle American Flag Vertically
The American flag is an emblem of our nation and our freedom. It needs to be handled with respect and displayed in a correct method. When hanging the flag vertically, there are some things to remember.
First, the flag needs to be hung with the blue area on the left and the white stripes on the best. The celebs needs to be on the high of the flag and the stripes needs to be hanging down. The flag needs to be hung at a top the place will probably be seen to all who cross by.
If you’re hanging the flag from a wall, it is best to use a flagpole or different applicable assist. The flag needs to be hung from the highest of the workers, and it needs to be taut sufficient in order that it’s not wrinkled or sagging.
If you’re hanging the flag from a flagpole, it is best to make it possible for the flagpole is sturdy sufficient to assist the burden of the flag. The flag needs to be raised to the highest of the pole, and it needs to be secured with a rope or clasp.
Individuals Additionally Ask
Which Aspect of the Flag Faces Out When Displayed Vertically?
When the American flag is displayed vertically, the blue area with the celebrities needs to be positioned on the left aspect of the flag and the white stripes needs to be on the best aspect.
How Excessive Ought to I Dangle the Flag When Displayed Vertically?
When the American flag is displayed vertically, it needs to be hung at a top the place will probably be seen to all who cross by.
Can I Dangle the Flag from My Home or Condo?
Sure, you’ll be able to dangle the American flag from your home or condo. Nevertheless, it is best to make it possible for the flag is displayed in a respectful method and that it’s not broken or desecrated.
